Acclaim-lighting AL Dimmer 1 HP User Manual download pdf

DESCRIPTIONS

Congratulations with your purchase of this product.

Check for transport damage.

You should be in possession of the following items:

1 AL-DIMMER-1 HP

1 Manual

1 Screwdriver

Should you discover transport damage after unpacking the equipment,

inform the hauler immediately. Never connect a damaged device. You

may also contact your supplier.

DELIVERY PACKET

TECHNICAL SPECIFICATIONS

Operation temperature

Housing

Control Protocol

Listing

Dimensions

Weight

0 degC to +40 degC

Black plastic

DMX-512 (1990)

CE certified

115(L) x 54(W) x 23(H)mm

150g

Analog In/THRU

2-pin terminal

OPERATION GUIDE

User Instructions

Connection

Terminal

Read this manual carefully before using our AL-DIMMER-1 HP. This unit serves as a single channel dimmer. It is

designed to set the intensity for the high power R.G.B. LEDs, features the user may select the current output as

350mA, 500mA or 700mA. Its working mode is available in DMX control and Manual Dim mode, and the analog

signal is available in 0~10V and 1~10V, it's working mode and the DMX address can be set by Dip-switch.

AL-DIMMER-1 HP

-1-

IP 20

Ingress Protection Rating

Power Requirement

12~24VDC

Loading Output

2-pin terminal

DC In

4-pin terminal

Make sure the output current matches the power requirements of the LED fixtures prior to use AL-DIMMER-1 HP.

1.Output Current Option

Output Current 350mA,500mA or 700mA for option

DMX In/Out

3-pin terminal

Made in P.R.C.

GND

Data-

Data+

+12-24V

GND

DC IN

DMX IN

DMX OUT

GND

Data -

Data+

OUTPUT

DMX Address Setting

RoHS

Addr

128

256

1 2

8 9 10

Dim

128

CURVE

11 12

1-10V0-10V

DMXMAN

THRU IN

GND

0-10V/1-10V

GND

0-10V/1-10V

350mA

500mA 700mA

AL-DIMMER-1 HP

The output current defaults as 350mA and a built-in Dipswitch allows the user to select the output current

as 350mA,500mA or 700mA.

The following contents instruct to how to make the selection for the output current.

1 2 3 4

Summary of Contents

Page 1 - User Instructions

DESCRIPTIONSCongratulations with your purchase of this product.Check for transport damage. You should be in possession of the following items:1 AL-DIM

Page 2

-2-1. Take out the AL-DIMMER-1 HP and the screw driver from packing.2. Use the screw driver to prize up the rear panel of AL-DIMMER-1 HP with the prop

Page 3 - 1 2 3 4 5 6 7 8 9 10

3.Manual Dim ModeIn this mode, the dip-switch 10 is flipped to the "OFF" position, Flip the dip-switch 1~8 to set the intensity of LED prod

Page 4 - 24-004-2824-00

-4-Rev1.024-004-2824-00*Please Note: Improvements and specifications in the design of the unit and the manual are subject to c